Products
SCBH Dry-type amorphous core transformer 10 kV
SCBH Dry type transformer with amorphous core is made with a magnetic core made of an amorphous alloy. No-load losses and no-load current are extremely low and amount to about 30% of those of transformers with a silicon steel magnetic core.
Description
marker
Product Description
SCBH Dry type transformer with amorphous core is made with a magnetic core made of an amorphous alloy. No-load losses and no-load current are extremely low and amount to about 30% of those of transformers with a silicon steel magnetic core. The no-load losses of a dry transformer with an amorphous magnetic core are 75% lower than the values established by the GB/T 10228 standard, which can significantly reduce operating costs and provide a significant energy-saving effect.
Product characteristics
1. Low power consumption and energy saving: Amorphous alloy core provides low no-load loss and no-load current, about 30% of that of silicon steel. The no-load losses of a dry transformer with an amorphous magnetic core are 75% lower than the standard values of GB/T 10228, which significantly reduces operating costs and provides a significant energy-saving effect.
2. High corrosion resistance: The amorphous alloy magnetic core is completely sealed with resin and high-temperature silicone, which effectively prevents corrosion and loss of amorphous alloy fragments, thereby reliably protecting the magnetic core and windings.
3. Low noise level: to reduce the operating noise of the product, rational working magnetic induction was selected during the design, the design of the magnetic core and windings was improved during the production process, and special noise-absorbing materials and technologies were used. The noise level of the product is 5–15 dB below the requirements of the national standard GB/T 10088.
4. High resistance to short circuit currents: the product is made using a three-phase three-rod design with a compact and rational fastening system for the magnetic core and windings. Dry transformers with an amorphous magnetic core produced by us were the first in China to successfully pass sudden short circuit tests.
5. Low partial discharge: Thanks to vacuum casting epoxy resin, the product has low heat, long service life and high heat dissipation ability. With forced air cooling, operation with 150% rated load is possible. The product is equipped with a temperature control and protection system that ensures reliable and safe operation of a dry transformer with an amorphous magnetic core.
contact us
Related Popular Products
KBSGZY Mine explosion-proof mobile transformer substation
KBSGZY Mine explosion-proof mobile transformer substation is intended for use in mines with the presence of a methane-air mixture and coal dust, which are hazardous due to explosion, as a switchgear for complex mechanized mining equipment in underground coal mines.
XGN2-12 Complete AC switchgear in metal enclosure, box-shaped stationary type
The stationary metal switchgear of the XGN2-12 series (hereinafter referred to as the “cabinet”) is intended for use in three-phase AC electrical networks with a voltage of 3.6; 7.2; 12 kV, frequency 50 (60) Hz for receiving and distributing electricity. The device is suitable for places with frequent switching operations.
XL-21 Power distribution cabinet
The low-voltage power distribution cabinet type XL-21 is made in a closed design. The body is made of bent steel sheets. The blade switch control handle is located on the top of the right front pillar and can be used to switch power supplies.
XGN66-12 Fixed type high voltage distribution cabinet
The cabinet is a complete device for indoor installation, designed to operate in three-phase AC electrical networks with a voltage of 3.6; 7.2; 12 kV, frequency 50 (60) Hz, with a single or sectional busbar system, for receiving and distributing electricity.
GCK Low-voltage drawout switch cabinet
GCK low-voltage withdrawable cabinet is a low-voltage switchgear, widely used in power plants, substations, industrial and mining plants, high-rise buildings and other fields.
ZW7-40.5 High voltage vacuum circuit breaker for outdoor installation
High-voltage AC vacuum switch for outdoor installation of the ZW7-40.5 series (hereinafter referred to as the “switch”) is a high-voltage electrical device for outdoor installation of three-phase alternating current with a frequency of 50 (60) Hz, rated voltage 40.5 kV.
Oil transformer 35 kV
35 kV oil power transformers are used at power system substations, as well as at 35 kV subscriber substations. The core is made of high quality oriented cold rolled silicon steel with high magnetic conductivity.
10kV Amorphous Core Oil Transformer
SBH amorphous core transformers are fully encapsulated oil-filled transformers. The magnetic core is made of an amorphous alloy consisting of such basic elements as iron, nickel, cobalt, silicon and boron.
RM6-12 Fully sealed ring main block with full insulation
The ring switchgear with environmentally friendly gas RM6-12 is a complete switchgear for a voltage of 12 kV, three-phase alternating current with a frequency of 50 (60) Hz, for a system of single and sectional busbars.
XGN15-12(24) High Voltage Gas Insulated Ring Main Unit
XGN15-12 (24) modular gas insulated ring type unified switchgear is a new generation air insulated metal ring type switchgear which uses SF6 gas switch as the main switch.
Integrated boost substation with energy storage and converter (AC/DC)
Integrated converter unit for energy storage systems - step-up transformer. By integrating two converters for energy storage systems and a step-up transformer, the overall system footprint is reduced, equipment manufacturing and transportation costs are reduced, assembly and end-to-end on-site setup time is reduced, and installation and maintenance efficiency is increased.
Dry transformer with open windings 10–35 kV
The dry transformer with open windings SGB is manufactured using the American DUPONT RELINTRAN technology using NOMEX insulating paper of heat resistance class H, approved by the American UL laboratory.
VD1-40.5 High voltage vacuum circuit breaker for indoor installation
The VD1-40.5 series high-voltage vacuum circuit breaker for indoor installation (hereinafter referred to as the “switch”) is designed for use in three-phase AC electrical systems with a frequency of 50 Hz, rated voltage 40.5 kV for switching on and off load currents, overload currents and short-circuit currents in industrial and mining enterprises, power plants and substations.
ZW32-40.5 Vacuum circuit breaker for outdoor installation
The outdoor high-voltage vacuum circuit breaker type ZW32-40.5 adopts uniquely designed solid cast poles with high reliability and highly reliable driving mechanism. This device is mainly used in medium-voltage overhead distribution networks to switch on and off load currents, overload currents and short-circuit currents.
Low voltage circuit breaker for indoor installation
Our company produces various low-voltage circuit breakers: DW1 frame circuit breakers, DM1 molded circuit breakers, DM1LE molded circuit breakers, DZ20/DZ47 miniature circuit breakers. The product is EAC certified.
HXGN□-12 Complete AC switchgear in a metal housing of a stationary type
HXGN□-12 series AC ring type switchgear is an air insulated metal ring type switchgear designed for distribution network automation, compact, expandable, which uses FLN□-12 SF6 gas load switch as the main switch.