Products
SCB-RL Dry-type transformer with epoxy insulation and space triangular core
SCB-RL Dry-type transformer with epoxy insulation and space triangular core is characterized by high technical level and advanced characteristics. Compared with similar products, it has a symmetrical three-phase magnetic circuit, low noise, high short-circuit current resistance, high price-quality ratio, and many other advantages.
Description
marker
Product Description
SCB-RL Dry-type transformer with epoxy insulation and space triangular core is characterized by high technical level and advanced characteristics.
Compared with similar products, it has a symmetrical three-phase magnetic circuit, low noise, high short-circuit current resistance, high price-quality ratio, and many other advantages.
① Thanks to the use of a spatial triangular magnetic circuit, the symmetry of the three-phase no-load current, suppression of the third harmonic and low noise level are achieved.
② No-load loss and no-load current are greatly reduced, and the energy saving effect is significant.
③ The main insulation is sealed with epoxy resin, which ensures reliable performance under harsh operating conditions.
④ The windings are cured by vacuum casting into a monolithic block, which ensures low partial discharge, high mechanical strength and high short-circuit current resistance.
⑤ Thin layer of epoxy insulation ensures good heat dissipation and high overload capacity.
contact us
Related Popular Products
RM6-12 Fully sealed ring main block with full insulation
The ring switchgear with environmentally friendly gas RM6-12 is a complete switchgear for a voltage of 12 kV, three-phase alternating current with a frequency of 50 (60) Hz, for a system of single and sectional busbars.
Dry-type transformer for renewable energy
A dry-type renewable energy transformer is an electrical power conversion equipment specifically designed for renewable energy generation systems. It is used in renewable energy projects such as photovoltaic generation and wind power, and serves to increase the output voltage of the generation system to a level suitable for connection to the electrical grid or supply to certain equipment.
KNY61-40.5 Complete AC switchgear in an armored metal housing with withdrawable elements
Complete switchgear with withdrawable elements of the KYN61-40.5 series (hereinafter referred to as the “switching device”). Its main feature is the use of a fully insulated ZN85-40.5 vacuum circuit breaker and spring actuator in the cabinet.
KBSGZY Mine explosion-proof mobile transformer substation
KBSGZY Mine explosion-proof mobile transformer substation is intended for use in mines with the presence of a methane-air mixture and coal dust, which are hazardous due to explosion, as a switchgear for complex mechanized mining equipment in underground coal mines.
VD1-12(24) Side mounted high voltage vacuum circuit breaker for indoor installation
The high-voltage vacuum circuit breaker for indoor installation with side mounting of the VD1-12 series (24) is a high-voltage switching device for indoor installation, intended for use in three-phase electrical systems with a voltage of 12 kV, a frequency of 50 (60) Hz as a protection and control device.
KBSG Mine explosion-proof dry transformer
KBSG Mine explosion-proof dry transformer is intended for use in mines with the presence of a methane-air mixture and coal dust, which are hazardous due to explosion, as a switchgear for complex mechanized mining equipment in underground coal mines.
KS General purpose mine oil transformer
Transformers of the KS series are distribution equipment for mines. These products are distinguished by their small dimensions, ease of descent into the mine, rational design, low losses and good heat dissipation properties.
Electric vehicle charging station
An electric charging station for electric vehicles is a charging device specifically designed for new energy vehicles, a kind of “gas station” for electric vehicles. Widely installed in residential areas, shopping malls, parking lots, roadside service areas and for charging electric trucks.
Single-phase transformer with cylindrical windings
The single-phase pole-mount transformer is made using highly efficient energy-saving twisted core design. The core is made of silicon steel or an amorphous alloy. The transformer is mounted suspended on power transmission line supports, has compact dimensions and requires low capital investments.
Electric furnace transformer
The furnace transformer is designed to power electric furnaces, converting the high input voltage into a lower voltage suitable for the operation of the furnaces. Widely used in the metallurgical industry: for steelmaking furnaces, ore-smelting furnaces, arc furnaces, resistance furnaces, salt baths, single-phase graphite furnaces, industrial frequency furnaces, as well as for electroslag remelting.
Integrated boost substation with energy storage and converter (AC/DC)
Integrated converter unit for energy storage systems - step-up transformer. By integrating two converters for energy storage systems and a step-up transformer, the overall system footprint is reduced, equipment manufacturing and transportation costs are reduced, assembly and end-to-end on-site setup time is reduced, and installation and maintenance efficiency is increased.
SVR Automatic Linear Voltage Regulator
The SVR Linear Automatic Voltage Regulator is a device that automatically adjusts the transformer ratio of its own unit to stabilize the output voltage by monitoring changes in line voltage.
Dry phase shifting transformer
One of the important technologies in high-voltage variable frequency technology is multi-stage summation technology, which uses an isolation transformer to connect several low-voltage modules in series to form a high-voltage output.
XGN15-12(24) High Voltage Gas Insulated Ring Main Unit
XGN15-12 (24) modular gas insulated ring type unified switchgear is a new generation air insulated metal ring type switchgear which uses SF6 gas switch as the main switch.
XGW-12 Container type distribution point (circular main unit with integration of primary and secondary equipment)
The XGW-12 series complete ring-type switchgear for outdoor installation (distribution point) was developed based on the experience of safe and reliable operation of distribution cabinets with switches in combination with distribution network automation technology, taking into account the conditions of our country, and is a complete electrical product that meets the advanced domestic technical level.
MNS Low voltage withdrawable switchgear
The low-voltage switchgear type MNS (hereinafter referred to as the “device”) was designed and manufactured on the basis of imported cabinets. Designed for use in alternating current systems with a frequency of 50 (60) Hz, rated operating voltage up to 660 V to control the generation, transmission, distribution, conversion of electricity and operation of electrical equipment.