Products
S13-M.ZT Intelligent transformer with on-load power control
The intelligent transformer with on-load power control type S13-M.ZT has two fixed power levels and is able to automatically switch between them without turning off the power depending on load changes.
Description
marker
Product Description
The intelligent transformer with on-load power control type S13-M.ZT has two fixed power levels and is able to automatically switch between them without turning off the power depending on load changes. As the load decreases or approaches no-load, the transformer automatically switches from high power to low power, significantly reducing no-load losses while eliminating the need for manual power-off switching as is the case with non-load-regulated transformers. This ensures true energy efficiency and intelligent operation.
This product is particularly suitable for rural electrical networks with severe seasonal load variations, residential areas with significant daily load variations, road lighting, urban shopping areas, part-time industrial areas, and distribution transformers feeding oil well pumps. In addition, it is applicable for 35 kV power transformers with large load fluctuations.
The intelligent transformer developed by our company with power control under load is protected by numerous patents. It consists of three main parts: a transformer, an on-load tap changer for power regulation, and a control cabinet with a built-in on-load power regulation controller. Features such as data storage, telesignaling, telecontrol, teleregulation, telemetering, smart networking, reactive power compensation control, and anti-theft protection make this model unattainable by traditional energy-saving products such as spiral-circuit transformers and amorphous transformers.
contact us
Related Popular Products
GTXGN-12 High Voltage Ring Trunk with Solid Insulation
The GTXGN-12 Series Solid Insulated Ring Switchgear is a fully insulated, fully sealed, maintenance-free solid insulated vacuum switching device.
XGN2-12 Complete AC switchgear in metal enclosure, box-shaped stationary type
The stationary metal switchgear of the XGN2-12 series (hereinafter referred to as the “cabinet”) is intended for use in three-phase AC electrical networks with a voltage of 3.6; 7.2; 12 kV, frequency 50 (60) Hz for receiving and distributing electricity. The device is suitable for places with frequent switching operations.
SGB-RL Dry transformer with open windings and space triangular core
High mechanical strength: the spatial twisted core has a round cross-section of the rods, which provides better resistance to short-circuit currents compared to an oval cross-section. After vacuum impregnation, the windings have high strength, and a special fastening method allows the product to withstand shock electrodynamic loads in the event of a sudden short circuit without damage.
ZW20-12(24)F High-voltage vacuum circuit breaker for outdoor installation with protection zone delimitation function
High-voltage vacuum circuit breaker for outdoor installation of the ZW20-12 (24) F/T☐-☐ series (hereinafter referred to as the “switch”) is a switchgear for outdoor installation with a rated voltage of 12 (24) kV, three-phase alternating current with a frequency of 50 (60) Hz.
Integrated boost substation with energy storage and converter (AC/DC)
Integrated converter unit for energy storage systems - step-up transformer. By integrating two converters for energy storage systems and a step-up transformer, the overall system footprint is reduced, equipment manufacturing and transportation costs are reduced, assembly and end-to-end on-site setup time is reduced, and installation and maintenance efficiency is increased.
Dry transformer with open windings 10–35 kV
The dry transformer with open windings SGB is manufactured using the American DUPONT RELINTRAN technology using NOMEX insulating paper of heat resistance class H, approved by the American UL laboratory.
RM6-12 Fully sealed ring main block with full insulation
The ring switchgear with environmentally friendly gas RM6-12 is a complete switchgear for a voltage of 12 kV, three-phase alternating current with a frequency of 50 (60) Hz, for a system of single and sectional busbars.
RW12 High voltage fall type fuse for outdoor installation
RW12 fuse-disconnector, full name RW12 type outdoor high-voltage AC fuse-disconnector, is a key protection device widely used in power distribution systems with voltages ranging from 10 to 35 kV.
KS General purpose mine oil transformer
Transformers of the KS series are distribution equipment for mines. These products are distinguished by their small dimensions, ease of descent into the mine, rational design, low losses and good heat dissipation properties.
VD1-40.5 High voltage vacuum circuit breaker for indoor installation
The VD1-40.5 series high-voltage vacuum circuit breaker for indoor installation (hereinafter referred to as the “switch”) is designed for use in three-phase AC electrical systems with a frequency of 50 Hz, rated voltage 40.5 kV for switching on and off load currents, overload currents and short-circuit currents in industrial and mining enterprises, power plants and substations.
FKN12-12 High voltage load switch for indoor installation
The combination device high-voltage load switch - AC fuse type FKRN12-12D/T125-31.5 is a high-voltage switching device for indoor installation, which is a combination of load switch FN12-12D and high-voltage current-limiting fuse type S ☐ LAJ-12 (XRNT ☐ -10).
SCB-RL Dry-type transformer with epoxy insulation and space triangular core
SCB-RL Dry-type transformer with epoxy insulation and space triangular core is characterized by high technical level and advanced characteristics. Compared with similar products, it has a symmetrical three-phase magnetic circuit, low noise, high short-circuit current resistance, high price-quality ratio, and many other advantages.
KBSGZY Mine explosion-proof mobile transformer substation
KBSGZY Mine explosion-proof mobile transformer substation is intended for use in mines with the presence of a methane-air mixture and coal dust, which are hazardous due to explosion, as a switchgear for complex mechanized mining equipment in underground coal mines.
Underground transformer substation
The underground complete transformer was developed by our company based on the concept of “green” electric power and optimization of the urban environment, using advanced foreign technologies and integrating the principles of modern urban environmental design, providing for a gradual transition to underground installation of transformers.
XL-21 Power distribution cabinet
The low-voltage power distribution cabinet type XL-21 is made in a closed design. The body is made of bent steel sheets. The blade switch control handle is located on the top of the right front pillar and can be used to switch power supplies.