Products
Electric furnace transformer
The furnace transformer is designed to power electric furnaces, converting the high input voltage into a lower voltage suitable for the operation of the furnaces. Widely used in the metallurgical industry: for steelmaking furnaces, ore-smelting furnaces, arc furnaces, resistance furnaces, salt baths, single-phase graphite furnaces, industrial frequency furnaces, as well as for electroslag remelting.
Description
marker
Product Description
The furnace transformer is designed to power electric furnaces, converting the high input voltage into a lower voltage suitable for the operation of the furnaces. Widely used in the metallurgical industry: for steelmaking furnaces, ore-smelting furnaces, arc furnaces, resistance furnaces, salt baths, single-phase graphite furnaces, industrial frequency furnaces, as well as for electroslag remelting.
Product Features
The magnetic core is made of high-quality anisotropic electrical steel, using an automatic cutting line, an oblique joint at an angle of 45°, without punching holes, banding with bondless glass tape. The windings are made according to a modern scheme of basic longitudinal insulation, with an optimal choice of winding and insulation design, ensuring sufficient mechanical strength. The product is characterized by high resistance to short circuits, increased overload capacity, high efficiency, low losses, reliability and safety in operation.
contact us
Related Popular Products
Integrated boost substation with energy storage and converter (AC/DC)
Integrated converter unit for energy storage systems - step-up transformer. By integrating two converters for energy storage systems and a step-up transformer, the overall system footprint is reduced, equipment manufacturing and transportation costs are reduced, assembly and end-to-end on-site setup time is reduced, and installation and maintenance efficiency is increased.
XGW-12 Container type distribution point (circular main unit with integration of primary and secondary equipment)
The XGW-12 series complete ring-type switchgear for outdoor installation (distribution point) was developed based on the experience of safe and reliable operation of distribution cabinets with switches in combination with distribution network automation technology, taking into account the conditions of our country, and is a complete electrical product that meets the advanced domestic technical level.
ZW32-12 Vacuum circuit breaker for outdoor installation
The high-voltage vacuum circuit breaker for outdoor installation of the ZW32-12(G) series (hereinafter referred to as the “switch”) is a switching switchgear for outdoor installation with a rated voltage of 12 kV, three-phase alternating current with a frequency of 50 (60) Hz.
SCB-RL Dry-type transformer with epoxy insulation and space triangular core
SCB-RL Dry-type transformer with epoxy insulation and space triangular core is characterized by high technical level and advanced characteristics. Compared with similar products, it has a symmetrical three-phase magnetic circuit, low noise, high short-circuit current resistance, high price-quality ratio, and many other advantages.
SVR Automatic Linear Voltage Regulator
The SVR Linear Automatic Voltage Regulator is a device that automatically adjusts the transformer ratio of its own unit to stabilize the output voltage by monitoring changes in line voltage.
MNS Low voltage withdrawable switchgear
The low-voltage switchgear type MNS (hereinafter referred to as the “device”) was designed and manufactured on the basis of imported cabinets. Designed for use in alternating current systems with a frequency of 50 (60) Hz, rated operating voltage up to 660 V to control the generation, transmission, distribution, conversion of electricity and operation of electrical equipment.
Low-voltage isolation transformer for photovoltaic systems with energy storage
This series of isolation transformers has the advantages of fire resistance, moisture protection, safety, reliability, energy saving and ease of maintenance.
10kV Amorphous Core Oil Transformer
SBH amorphous core transformers are fully encapsulated oil-filled transformers. The magnetic core is made of an amorphous alloy consisting of such basic elements as iron, nickel, cobalt, silicon and boron.
FKN12-12 High voltage load switch for indoor installation
The combination device high-voltage load switch - AC fuse type FKRN12-12D/T125-31.5 is a high-voltage switching device for indoor installation, which is a combination of load switch FN12-12D and high-voltage current-limiting fuse type S ☐ LAJ-12 (XRNT ☐ -10).
KBSG Mine explosion-proof dry transformer
KBSG Mine explosion-proof dry transformer is intended for use in mines with the presence of a methane-air mixture and coal dust, which are hazardous due to explosion, as a switchgear for complex mechanized mining equipment in underground coal mines.
ZW7-40.5 High voltage vacuum circuit breaker for outdoor installation
High-voltage AC vacuum switch for outdoor installation of the ZW7-40.5 series (hereinafter referred to as the “switch”) is a high-voltage electrical device for outdoor installation of three-phase alternating current with a frequency of 50 (60) Hz, rated voltage 40.5 kV.
Underground transformer substation
The underground complete transformer was developed by our company based on the concept of “green” electric power and optimization of the urban environment, using advanced foreign technologies and integrating the principles of modern urban environmental design, providing for a gradual transition to underground installation of transformers.
Dry phase shifting transformer
One of the important technologies in high-voltage variable frequency technology is multi-stage summation technology, which uses an isolation transformer to connect several low-voltage modules in series to form a high-voltage output.
XGN15-12(24) High Voltage Gas Insulated Ring Main Unit
XGN15-12 (24) modular gas insulated ring type unified switchgear is a new generation air insulated metal ring type switchgear which uses SF6 gas switch as the main switch.
S13-RL Oil transformer with spatial twisted core
High mechanical strength: the spatial twisted core has a round cross-section of the rods, which provides better resistance to short-circuit currents compared to the oval cross-section. In addition, a high degree of filling with gaskets and reliable fixation increase the resistance of the product to short-circuit currents.
Dry-type transformer for renewable energy
A dry-type renewable energy transformer is an electrical power conversion equipment specifically designed for renewable energy generation systems. It is used in renewable energy projects such as photovoltaic generation and wind power, and serves to increase the output voltage of the generation system to a level suitable for connection to the electrical grid or supply to certain equipment.