Products
Three-phase complete transformer substation of European type
The YBM European type complete transformer for voltage 10–35 kV is distinguished by its compact design, small footprint, safety, reliability and ease of installation. The product can be installed in the center of loads and move with them.
Description
marker
Product Description
The YBM European type complete transformer for voltage 10–35 kV is distinguished by its compact design, small footprint, safety, reliability and ease of installation. The product can be installed in the center of loads and move with them. Due to this, this product is widely used in construction sites, residential areas, high-rise buildings, airports, railways, subways, highways, oil fields, ports and other sites.
Product Features
1.Multifunction
Capable of interrupting short circuit currents and load currents, providing complete transformer protection.
The high-voltage part can implement various power supply schemes: ring, two-feed, dead-end, with high-voltage electricity metering and others, possessing all the functions of a traditional capital construction substation.
2.Low investment, small footprint, quick commissioning
Low investment: lower than traditional capital construction substation.
Small footprint: the volume is about 1/3 of the volume of a traditional capital construction substation.
Quick commissioning: from the start of excavation to installation of the product and commissioning - about one week.
3.High security
The product has a completely sealed design, the housing is reliably grounded, and does not require insulating gaps, which completely ensures the safety of personnel.
The transformer compartment is equipped with a protective mesh to prevent personnel from accidentally entering the transformer compartment.
4.Superior heating and cooling design
The housing is made according to a ventilation scheme with a “chimney effect”; the optimized design ensures high dissipation capacity.
The case temperature rise meets the requirements of class 10K according to GB/T 17467-2010.
5.Rich and flexible structure
European-style complete transformers can be configured as linear monoblock, triangular monoblock, linear with low-voltage service pass-through and others to meet the requirements of different users and projects.
6.High adaptability to environmental conditions
There are different types of housings to choose from: cold-rolled sheet steel, aluminum-zinc coated steel, stainless steel and also GRC. Different types of enclosures adapt well to different environmental conditions and customer requirements.
contact us
Related Popular Products
GCK Low-voltage drawout switch cabinet
GCK low-voltage withdrawable cabinet is a low-voltage switchgear, widely used in power plants, substations, industrial and mining plants, high-rise buildings and other fields.
Single-phase transformer with cylindrical windings
The single-phase pole-mount transformer is made using highly efficient energy-saving twisted core design. The core is made of silicon steel or an amorphous alloy. The transformer is mounted suspended on power transmission line supports, has compact dimensions and requires low capital investments.
ZW32-12 Vacuum circuit breaker for outdoor installation
The high-voltage vacuum circuit breaker for outdoor installation of the ZW32-12(G) series (hereinafter referred to as the “switch”) is a switching switchgear for outdoor installation with a rated voltage of 12 kV, three-phase alternating current with a frequency of 50 (60) Hz.
XL-21 Power distribution cabinet
The low-voltage power distribution cabinet type XL-21 is made in a closed design. The body is made of bent steel sheets. The blade switch control handle is located on the top of the right front pillar and can be used to switch power supplies.
Oil transformer 10–20 kV
Oil-filled transformers 10–20 kV are made using a fully sealed corrugated tank and vacuum oil filling technology. They are characterized by stable and reliable operation, effectively slow down the aging of insulation and reduce maintenance costs.
Dry transformer with open windings 10–35 kV
The dry transformer with open windings SGB is manufactured using the American DUPONT RELINTRAN technology using NOMEX insulating paper of heat resistance class H, approved by the American UL laboratory.
KBSG Mine explosion-proof dry transformer
KBSG Mine explosion-proof dry transformer is intended for use in mines with the presence of a methane-air mixture and coal dust, which are hazardous due to explosion, as a switchgear for complex mechanized mining equipment in underground coal mines.
Block-modular substation
The main function of a modular converter substation is to convert the low-voltage alternating current generated by the generating system in the new energy field into medium-voltage alternating current and supply electricity to the electrical grid.
XGN17-40.5 Complete alternating current switchgear in a metal housing, box-shaped stationary type
XGN17-40.5 series stationary metal complete alternating current switchgear (hereinafter referred to as the “switching device”). The degree of protection of its outer shell corresponds to IP2X according to the GB4208 standard.
HXGN□-12 Complete AC switchgear in a metal housing of a stationary type
HXGN□-12 series AC ring type switchgear is an air insulated metal ring type switchgear designed for distribution network automation, compact, expandable, which uses FLN□-12 SF6 gas load switch as the main switch.
SCB-RL Dry-type transformer with epoxy insulation and space triangular core
SCB-RL Dry-type transformer with epoxy insulation and space triangular core is characterized by high technical level and advanced characteristics. Compared with similar products, it has a symmetrical three-phase magnetic circuit, low noise, high short-circuit current resistance, high price-quality ratio, and many other advantages.
Integrated boost substation with energy storage and converter (AC/DC)
Integrated converter unit for energy storage systems - step-up transformer. By integrating two converters for energy storage systems and a step-up transformer, the overall system footprint is reduced, equipment manufacturing and transportation costs are reduced, assembly and end-to-end on-site setup time is reduced, and installation and maintenance efficiency is increased.
GKD Mine low-voltage distribution cabinet for general purposes
The general-mine low-voltage distribution cabinet type GKD is a power distribution and control device specially designed for the harsh conditions of underground mining.
ZW32-40.5 Vacuum circuit breaker for outdoor installation
The outdoor high-voltage vacuum circuit breaker type ZW32-40.5 adopts uniquely designed solid cast poles with high reliability and highly reliable driving mechanism. This device is mainly used in medium-voltage overhead distribution networks to switch on and off load currents, overload currents and short-circuit currents.
VD1-40.5 High voltage vacuum circuit breaker for indoor installation
The VD1-40.5 series high-voltage vacuum circuit breaker for indoor installation (hereinafter referred to as the “switch”) is designed for use in three-phase AC electrical systems with a frequency of 50 Hz, rated voltage 40.5 kV for switching on and off load currents, overload currents and short-circuit currents in industrial and mining enterprises, power plants and substations.