Products
VD1-12(24) High voltage vacuum circuit breaker for indoor installation
The VD1-12 (24) series high-voltage vacuum circuit breaker for indoor installation is a high-voltage complete switchgear for indoor installation of three-phase alternating current with a frequency of 50 (60) Hz, rated voltage 12 (24) kV and below.
Description
marker
Product Description
The VD1-12 (24) series high-voltage vacuum circuit breaker for indoor installation is a high-voltage complete switchgear for indoor installation of three-phase alternating current with a frequency of 50 (60) Hz, rated voltage 12 (24) kV and below. It is used in conjunction with distribution cabinets type KYN28-12 (24) (GZS1), and can also be used with distribution cabinets of many other types. Designed for control and protection in power transmission and distribution systems at power plants, substations and other facilities, and can also be used in places with frequent switching operations. The product complies with GB1984 High Voltage AC Switches. Accessories: insulating trolley, trolley with voltage transformer and trolley with fuse. The switch is made using a combined insulation scheme, which ensures compliance with insulation requirements under normal operating conditions and effectively reduces the size of the switch. The overall layout is rational, aesthetic and concise. The drive mechanism is made in the form of a spring mechanism built into the switch body. AC or DC control is possible, as well as manual control. The switch is available in stationary and withdrawable versions. The withdrawable version is equipped with a special roll-in/roll-out mechanism, which allows you to easily move the cart inside the cabinet. Equipped with forced mechanical interlocking to ensure compliance with the “five safety” interlocking requirements for distribution cabinets.
contact us
Related Popular Products
VD1-12(24) Side mounted high voltage vacuum circuit breaker for indoor installation
The high-voltage vacuum circuit breaker for indoor installation with side mounting of the VD1-12 series (24) is a high-voltage switching device for indoor installation, intended for use in three-phase electrical systems with a voltage of 12 kV, a frequency of 50 (60) Hz as a protection and control device.
FKN12-12 High voltage load switch for indoor installation
The combination device high-voltage load switch - AC fuse type FKRN12-12D/T125-31.5 is a high-voltage switching device for indoor installation, which is a combination of load switch FN12-12D and high-voltage current-limiting fuse type S ☐ LAJ-12 (XRNT ☐ -10).
Low-voltage isolation transformer for photovoltaic systems with energy storage
This series of isolation transformers has the advantages of fire resistance, moisture protection, safety, reliability, energy saving and ease of maintenance.
Dry transformer with open windings 10–35 kV
The dry transformer with open windings SGB is manufactured using the American DUPONT RELINTRAN technology using NOMEX insulating paper of heat resistance class H, approved by the American UL laboratory.
Oil transformer 10–20 kV
Oil-filled transformers 10–20 kV are made using a fully sealed corrugated tank and vacuum oil filling technology. They are characterized by stable and reliable operation, effectively slow down the aging of insulation and reduce maintenance costs.
KBSG Mine explosion-proof dry transformer
KBSG Mine explosion-proof dry transformer is intended for use in mines with the presence of a methane-air mixture and coal dust, which are hazardous due to explosion, as a switchgear for complex mechanized mining equipment in underground coal mines.
CSD Marine Transformer
They are used as electrical equipment for lighting, power distribution or galvanic isolation of networks on ships, offshore platforms and other facilities. Marine lighting transformer is an important equipment.
Integrated boost substation with energy storage and converter (AC/DC)
Integrated converter unit for energy storage systems - step-up transformer. By integrating two converters for energy storage systems and a step-up transformer, the overall system footprint is reduced, equipment manufacturing and transportation costs are reduced, assembly and end-to-end on-site setup time is reduced, and installation and maintenance efficiency is increased.
XGN17-40.5 Complete alternating current switchgear in a metal housing, box-shaped stationary type
XGN17-40.5 series stationary metal complete alternating current switchgear (hereinafter referred to as the “switching device”). The degree of protection of its outer shell corresponds to IP2X according to the GB4208 standard.
Oil transformer 35 kV
35 kV oil power transformers are used at power system substations, as well as at 35 kV subscriber substations. The core is made of high quality oriented cold rolled silicon steel with high magnetic conductivity.
Electric furnace transformer
The furnace transformer is designed to power electric furnaces, converting the high input voltage into a lower voltage suitable for the operation of the furnaces. Widely used in the metallurgical industry: for steelmaking furnaces, ore-smelting furnaces, arc furnaces, resistance furnaces, salt baths, single-phase graphite furnaces, industrial frequency furnaces, as well as for electroslag remelting.
10kV Amorphous Core Oil Transformer
SBH amorphous core transformers are fully encapsulated oil-filled transformers. The magnetic core is made of an amorphous alloy consisting of such basic elements as iron, nickel, cobalt, silicon and boron.
ZW32-40.5 Vacuum circuit breaker for outdoor installation
The outdoor high-voltage vacuum circuit breaker type ZW32-40.5 adopts uniquely designed solid cast poles with high reliability and highly reliable driving mechanism. This device is mainly used in medium-voltage overhead distribution networks to switch on and off load currents, overload currents and short-circuit currents.
GKD Mine low-voltage distribution cabinet for general purposes
The general-mine low-voltage distribution cabinet type GKD is a power distribution and control device specially designed for the harsh conditions of underground mining.
GCK Low-voltage drawout switch cabinet
GCK low-voltage withdrawable cabinet is a low-voltage switchgear, widely used in power plants, substations, industrial and mining plants, high-rise buildings and other fields.
Block-modular substation
The main function of a modular converter substation is to convert the low-voltage alternating current generated by the generating system in the new energy field into medium-voltage alternating current and supply electricity to the electrical grid.