Products
S13-RL Oil transformer with spatial twisted core
High mechanical strength: the spatial twisted core has a round cross-section of the rods, which provides better resistance to short-circuit currents compared to the oval cross-section. In addition, a high degree of filling with gaskets and reliable fixation increase the resistance of the product to short-circuit currents.
Description
marker
Product Description
Low losses: due to the fact that the oil transformer with a spatial twisted core is characterized by the absence of joints, low magnetic resistance, the coincidence of the direction of magnetic flux in the corner parts with the rolling direction of silicon steel, high winding density and light weight of the core, compared with traditional oil transformers with a laminated core, the no-load loss Po is reduced by 18-28%, and the current idle speed Io is reduced by 50–60%. The energy saving effect is significant, operation is economical.
Low noise level: The noise level of the space-twisted core oil transformer is 5-10 dB lower than that of the laminated core oil transformer. This is an ideal low noise product.
High mechanical strength: the spatial twisted core has a round cross-section of the rods, which provides better resistance to short-circuit currents compared to the oval cross-section. In addition, a high degree of filling with gaskets and reliable fixation increase the resistance of the product to short-circuit currents.
contact us
Related Popular Products
SVR Automatic Linear Voltage Regulator
The SVR Linear Automatic Voltage Regulator is a device that automatically adjusts the transformer ratio of its own unit to stabilize the output voltage by monitoring changes in line voltage.
Transformer with increased overload capacity
High overload transformer (also called high capacity transformer) is a new type of transformer featuring high efficiency and low energy consumption, developed by our company through years of research. This transformer is continuously improved based on the design principles of transformers for medium frequency induction furnaces.
KYN450(550)-12 Small-sized intelligent AC switchgear in an armored metal housing with withdrawable elements
The KYN450 (550)-12 product is a new generation of medium voltage air insulated armored switchgear with withdrawable elements, which was developed as a result of continuous improvement of medium voltage switchgear manufacturing technology.
10kV Amorphous Core Oil Transformer
SBH amorphous core transformers are fully encapsulated oil-filled transformers. The magnetic core is made of an amorphous alloy consisting of such basic elements as iron, nickel, cobalt, silicon and boron.
GCK Low-voltage drawout switch cabinet
GCK low-voltage withdrawable cabinet is a low-voltage switchgear, widely used in power plants, substations, industrial and mining plants, high-rise buildings and other fields.
KYN28A-12(24) Complete AC switchgear in an armored metal housing with withdrawable elements
The complete switchgear with withdrawable elements of the KYN28A-12 series (24) for indoor installation is a complete switchgear for indoor installation, three-phase alternating current with a frequency of 50/60 Hz, rated voltage 12 (24) kV, operating current up to 4000 A.
Oil transformer 35 kV
35 kV oil power transformers are used at power system substations, as well as at 35 kV subscriber substations. The core is made of high quality oriented cold rolled silicon steel with high magnetic conductivity.
Electric vehicle charging station
An electric charging station for electric vehicles is a charging device specifically designed for new energy vehicles, a kind of “gas station” for electric vehicles. Widely installed in residential areas, shopping malls, parking lots, roadside service areas and for charging electric trucks.
GKD Mine low-voltage distribution cabinet for general purposes
The general-mine low-voltage distribution cabinet type GKD is a power distribution and control device specially designed for the harsh conditions of underground mining.
GGD Fixed Low Voltage AC Distribution Cabinet
GGD series low voltage AC distribution cabinet is designed for use in power distribution systems in power plants, substations, petrochemical plants, industrial and mining plants, high-rise buildings and other facilities for power distribution, in electric motor control centers, for reactive power compensation and other needs of electricity consumers.
Electric furnace transformer
The furnace transformer is designed to power electric furnaces, converting the high input voltage into a lower voltage suitable for the operation of the furnaces. Widely used in the metallurgical industry: for steelmaking furnaces, ore-smelting furnaces, arc furnaces, resistance furnaces, salt baths, single-phase graphite furnaces, industrial frequency furnaces, as well as for electroslag remelting.
KS General purpose mine oil transformer
Transformers of the KS series are distribution equipment for mines. These products are distinguished by their small dimensions, ease of descent into the mine, rational design, low losses and good heat dissipation properties.
VD1-12(24) Side mounted high voltage vacuum circuit breaker for indoor installation
The high-voltage vacuum circuit breaker for indoor installation with side mounting of the VD1-12 series (24) is a high-voltage switching device for indoor installation, intended for use in three-phase electrical systems with a voltage of 12 kV, a frequency of 50 (60) Hz as a protection and control device.
Wind-solar storage transformer substation container type (Chinese type)
The complete wind power transformer substation (Chinese type) is a high-voltage/low-voltage pre-assembled substation that integrates high-voltage switching equipment, oil-filled step-up transformer, low-voltage distribution cabinets and related auxiliary equipment.
European type cable distribution cabinet
The European-style cable drop cabinet, usually designated starting with DFW (such as DFW-12), is a key device widely used in power distribution systems.