Products
Single-phase transformer with cylindrical windings
The single-phase pole-mount transformer is made using highly efficient energy-saving twisted core design. The core is made of silicon steel or an amorphous alloy. The transformer is mounted suspended on power transmission line supports, has compact dimensions and requires low capital investments.
Description
marker
Product Description
The single-phase pole-mount transformer is made using highly efficient energy-saving twisted core design. The core is made of silicon steel or an amorphous alloy. The transformer is mounted suspended on power transmission line supports, has compact dimensions and requires low capital investments. Reducing the radius of low-voltage power supply can reduce losses in low-voltage lines by more than 60%. The product is suitable for use in rural electrical networks, remote mountainous areas, power supply to dispersed settlements, agricultural production, lighting and power loads, and can also be used in railways and in the modernization of urban pole-mounted distribution networks.
Applicable standards: IEC 76, BS 171.
Product characteristics
1. The product can operate in single-phase mode or as part of a group of three single-phase transformers in three-phase mode.
2. Simple and quick installation.
3. Excellent insulation and sealing system.
4. Increased system reliability.
5. Lower operating costs.
Technical Parameters
Standard version: 50/60 Hz (5–167 kVA)
Primary voltage: 2400–34,500 V
Secondary voltage: 120–600 V
Transformers with parameters beyond standard specifications can be manufactured according to customer requirements.
contact us
Related Popular Products
PKD Mine distribution box
The low-voltage distribution cabinet of general mine type PKD is a power distribution and control device specially designed for non-coal mines and other underground areas.
XGN17-40.5 Complete alternating current switchgear in a metal housing, box-shaped stationary type
XGN17-40.5 series stationary metal complete alternating current switchgear (hereinafter referred to as the “switching device”). The degree of protection of its outer shell corresponds to IP2X according to the GB4208 standard.
Three-phase complete transformer substation of European type
The YBM European type complete transformer for voltage 10–35 kV is distinguished by its compact design, small footprint, safety, reliability and ease of installation. The product can be installed in the center of loads and move with them.
Dry phase shifting transformer
One of the important technologies in high-voltage variable frequency technology is multi-stage summation technology, which uses an isolation transformer to connect several low-voltage modules in series to form a high-voltage output.
Dry transformer with split windings
Double guarantee of power supply safety: if a fault occurs in one power circuit, the other split winding continues to supply electricity. High-precision electromagnetic balance: the symmetry deviation of the split windings is less than 2%, which meets the requirements of ampere-turn balance.
XGN2-12 Complete AC switchgear in metal enclosure, box-shaped stationary type
The stationary metal switchgear of the XGN2-12 series (hereinafter referred to as the “cabinet”) is intended for use in three-phase AC electrical networks with a voltage of 3.6; 7.2; 12 kV, frequency 50 (60) Hz for receiving and distributing electricity. The device is suitable for places with frequent switching operations.
SCBH Dry-type amorphous core transformer 10 kV
SCBH Dry type transformer with amorphous core is made with a magnetic core made of an amorphous alloy. No-load losses and no-load current are extremely low and amount to about 30% of those of transformers with a silicon steel magnetic core.
RM6-12 Fully sealed ring main block with full insulation
The ring switchgear with environmentally friendly gas RM6-12 is a complete switchgear for a voltage of 12 kV, three-phase alternating current with a frequency of 50 (60) Hz, for a system of single and sectional busbars.
KYN28A-12(24) Complete AC switchgear in an armored metal housing with withdrawable elements
The complete switchgear with withdrawable elements of the KYN28A-12 series (24) for indoor installation is a complete switchgear for indoor installation, three-phase alternating current with a frequency of 50/60 Hz, rated voltage 12 (24) kV, operating current up to 4000 A.
Transformer with increased overload capacity
High overload transformer (also called high capacity transformer) is a new type of transformer featuring high efficiency and low energy consumption, developed by our company through years of research. This transformer is continuously improved based on the design principles of transformers for medium frequency induction furnaces.
Dry-type transformer for renewable energy
A dry-type renewable energy transformer is an electrical power conversion equipment specifically designed for renewable energy generation systems. It is used in renewable energy projects such as photovoltaic generation and wind power, and serves to increase the output voltage of the generation system to a level suitable for connection to the electrical grid or supply to certain equipment.
European type cable distribution cabinet
The European-style cable drop cabinet, usually designated starting with DFW (such as DFW-12), is a key device widely used in power distribution systems.
FKN12-12 High voltage load switch for indoor installation
The combination device high-voltage load switch - AC fuse type FKRN12-12D/T125-31.5 is a high-voltage switching device for indoor installation, which is a combination of load switch FN12-12D and high-voltage current-limiting fuse type S ☐ LAJ-12 (XRNT ☐ -10).
XGN15-12(24) High Voltage Gas Insulated Ring Main Unit
XGN15-12 (24) modular gas insulated ring type unified switchgear is a new generation air insulated metal ring type switchgear which uses SF6 gas switch as the main switch.
Underground transformer substation
The underground complete transformer was developed by our company based on the concept of “green” electric power and optimization of the urban environment, using advanced foreign technologies and integrating the principles of modern urban environmental design, providing for a gradual transition to underground installation of transformers.
Three-phase complete transformer substation of American type
The American ZGS type complete transformer is a product widely used in power distribution systems. Unlike the European complete transformer, it is not a simple combination of a transformer and high-voltage and low-voltage cabinets, but is a complex electrical device developed on the basis of a transformer.