Products
Wind-solar storage transformer substation container type (Chinese type)
The complete wind power transformer substation (Chinese type) is a high-voltage/low-voltage pre-assembled substation that integrates high-voltage switching equipment, oil-filled step-up transformer, low-voltage distribution cabinets and related auxiliary equipment.
Description
marker
Product Description
The complete wind power transformer substation (Chinese type) is a high-voltage/low-voltage pre-assembled substation that integrates high-voltage switching equipment, oil-filled step-up transformer, low-voltage distribution cabinets and related auxiliary equipment. This is a specialized switchgear that increases the low voltage coming from the wind turbine using an oil-filled step-up transformer to 35 kV, after which the electricity is transferred up the 35 kV lines. This product is an ideal auxiliary equipment for wind power systems.
Product Features
1.One-piece top cover design, high degree of protection, compact structure, small footprint.
2. The high-voltage part is equipped with a separate high-voltage cabinet using a load switch-fuse combination or a vacuum circuit breaker, which ensures reliable protection and convenient maintenance and repair. Uses oil transformer with oil as insulating material; The radiator is located outside, which ensures high cooling efficiency. Pressure gauges with a communication interface are installed on the transformer tank; Low oil level signal, high temperature signal, overheat shutdown signal are transmitted through a microprocessor device to the main station, which allows telemetering, telecontrol and real-time monitoring of the substation.
3.IP54 protection rating, suitable for working in harsh environments: strong wind, sand storms, extreme temperatures.
4.Ease of repair and maintenance, reduction of operating costs.
contact us
Related Popular Products
American type single-phase complete transformer substation
The American type single-phase mini-substation package transformer is a compact switchgear in which the transformer, high-voltage load switch and protective fuse are hermetically placed in one common oil tank.
RW12 High voltage fall type fuse for outdoor installation
RW12 fuse-disconnector, full name RW12 type outdoor high-voltage AC fuse-disconnector, is a key protection device widely used in power distribution systems with voltages ranging from 10 to 35 kV.
GKD Mine low-voltage distribution cabinet for general purposes
The general-mine low-voltage distribution cabinet type GKD is a power distribution and control device specially designed for the harsh conditions of underground mining.
GTXGN-12 High Voltage Ring Trunk with Solid Insulation
The GTXGN-12 Series Solid Insulated Ring Switchgear is a fully insulated, fully sealed, maintenance-free solid insulated vacuum switching device.
American type cable distribution cabinet
American type cable branch cabinet is a characteristic cable connection device in power distribution systems. Its design concept originated in North America and is now also widely used in industrial parks, shopping malls and densely populated urban areas in China.
Three-phase complete transformer substation of American type
The American ZGS type complete transformer is a product widely used in power distribution systems. Unlike the European complete transformer, it is not a simple combination of a transformer and high-voltage and low-voltage cabinets, but is a complex electrical device developed on the basis of a transformer.
KBSGZY Mine explosion-proof mobile transformer substation
KBSGZY Mine explosion-proof mobile transformer substation is intended for use in mines with the presence of a methane-air mixture and coal dust, which are hazardous due to explosion, as a switchgear for complex mechanized mining equipment in underground coal mines.
SVR Automatic Linear Voltage Regulator
The SVR Linear Automatic Voltage Regulator is a device that automatically adjusts the transformer ratio of its own unit to stabilize the output voltage by monitoring changes in line voltage.
RM6-12 Fully sealed ring main block with full insulation
The ring switchgear with environmentally friendly gas RM6-12 is a complete switchgear for a voltage of 12 kV, three-phase alternating current with a frequency of 50 (60) Hz, for a system of single and sectional busbars.
SCZB Dry transformer with on-load voltage regulation
The dry-type transformer SCZB with on-load voltage regulation is a dry-type transformer that allows manual or automatic step voltage regulation without turning off the power.
XGW-12 Container type distribution point (circular main unit with integration of primary and secondary equipment)
The XGW-12 series complete ring-type switchgear for outdoor installation (distribution point) was developed based on the experience of safe and reliable operation of distribution cabinets with switches in combination with distribution network automation technology, taking into account the conditions of our country, and is a complete electrical product that meets the advanced domestic technical level.
10kV Amorphous Core Oil Transformer
SBH amorphous core transformers are fully encapsulated oil-filled transformers. The magnetic core is made of an amorphous alloy consisting of such basic elements as iron, nickel, cobalt, silicon and boron.
KYN28A-12(24) Complete AC switchgear in an armored metal housing with withdrawable elements
The complete switchgear with withdrawable elements of the KYN28A-12 series (24) for indoor installation is a complete switchgear for indoor installation, three-phase alternating current with a frequency of 50/60 Hz, rated voltage 12 (24) kV, operating current up to 4000 A.
Oil transformer 10–20 kV
Oil-filled transformers 10–20 kV are made using a fully sealed corrugated tank and vacuum oil filling technology. They are characterized by stable and reliable operation, effectively slow down the aging of insulation and reduce maintenance costs.
VD1-12(24) Side mounted high voltage vacuum circuit breaker for indoor installation
The high-voltage vacuum circuit breaker for indoor installation with side mounting of the VD1-12 series (24) is a high-voltage switching device for indoor installation, intended for use in three-phase electrical systems with a voltage of 12 kV, a frequency of 50 (60) Hz as a protection and control device.